- Offset pole structure - Balances headroom where you need it most
- Side entry - Easy, unobstructed access
- Double-wall design - Modularity and condensation management
- Side vestibule - Keeps your gear accessible without blocking entry
- Vented apexes - Enhanced airflow to reduce condensation
- Recycled silpoly fabric - Stays taut when wet
- Two inner material options - A more durable, standard option, or a lighter weight option
- Three length options - Dial in the length to your height and needs
Pay in installments of $5.86 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
enlarge the space of your tent 1P Swiftline Ultralight TentQuick specs Available in three lengths and with two material options. Rain fly: 368g 13. 0 oz Inner: 239 349g 8. 4 12. 3 oz Packaged wt: 700 811g 24. 7 28. 6 oz Interior height: ~107 109cm ~42 43" Floor width: 76cm 30" Floor length: 203 233cm 80 92" Made in Montana, USA with imported fabric. Description We love the feeling of being inside your tent while the rain falls. Everything feels as it should. This shelter is built for that. The Swiftline is a
Quick specs
Available in three lengths and with two material options.
-
Rain fly:
368g | 13.0 oz -
Inner:
239 - 349g | 8.4 - 12.3 oz -
Packaged wt:
700 - 811g | 24.7 - 28.6 oz
-
Interior height:
~107 - 109cm | ~42 - 43" -
Floor width:
76cm | 30" -
Floor length:
203 - 233cm | 80 - 92"
Made in Montana, USA with imported fabric.
Description
We love the feeling of being inside your tent while the rain falls. Everything feels as it should. This shelter is built for that.
The Swiftline is a lightweight trekking pole shelter designed for livability. An offset pole structure, side vestibule, and double-wall design make for a comfortable, stormworthy shelter.
The original Swiftline
Thirteen years in the making
Conceptualized around 2010 and launched in 2013, the Swiftline gained a loyal following. But there were two things we always knew we wanted to address: the fully asymmetric design made for a steep learning curve when pitching it, and the complex construction made it challenging to maintain consistent quality.
We paused in 2020 to fix both. It's built today in small batches in Missoula, Montana, by us, a team of two. We're glad it's back.
Open layout
On clear nights, roll back the tent walls for a more open and connected experience. Gaze at the stars while remaining protected from the bugs.
Interior space
The Swiftline was a pioneer of the offset pole structure. The diagonal ridgeline puts headroom where you sit, plus volume above your head and at your feet when lying down.
The inner net provides about 43" of interior height along the ridge. At the head and foot, you'll find ~10" of vertical space above the floor. Check out the topo maps below to see the full profile.
Click to enlargeQuick, intuitive pitch - fly first, pole handles up
Stake the four corners, insert and stake the poles, then stake the vestibules. Use eight stakes for maximum stability in storms, or six to save weight.
Pitching the fly first keeps the inner dry in the rain. For faster setup, you can leave both pieces clipped together and pitch them as one.
Orient your trekking poles so the tips point down. This protects the fly from punctures and keeps your pole handles out of reach of nibbling critters.
Designed for trekking poles, with optional tent poles available if you prefer.
Convenience: Side-entry & vestibule space
Enter and exit easily from the side with a zipper that can be operated with one hand. The side vestibule keeps your gear accessible without blocking the door.
Double-wall design
The Swiftline consists of two modular components: a rain fly and an inner net tent. Use the fly solo for a minimalist tarp setup, or pair them together for full protection. The double-wall design creates an air gap between layers that, along with vented apexes, mitigates condensation buildup.
Material options
Silpoly fabric and aggressive curves create a taut, wind-shedding pitch that won't sag in the rain. The fly uses recycled fabric, and the inner comes in two options: a lighter recycled Sil/Sil coated floor with 0.5 oz netting, or a more durable Sil/PU coated floor with 0.6 oz netting for better puncture resistance and grip.
We use a durable #5 Aquaguard zipper on the fly and a lighter #3 on the inner. Zipper sliders are often the first component to wear out, so regular cleaning and lubrication helps extend their life - especially in dusty conditions. If you ever need the sliders replaced, just get in touch.
Tub-floor w/ 3 length options
The Swiftline's floor measures 30" wide and is available in three lengths, 80", 86", or 92" (203, 218, or 234cm). The 7 - 8" deep tub tapers outward at the top to give you more elbow room.
Notes/FAQ:
- Do I need a groundsheet? Using a groundsheet will help extend the life of any floor. It's usually not necessary with either of our floor options, but the light floor option will benefit from a groundsheet more than the standard option.
- Do I need to seal the seams? Yes, before your first trip. Apply Seam Grip +SIL to the outside of the fly seams. Plan for 30-60 minutes. See our seam sealing guide for step-by-step instructions. The floor corners can also be sealed the same way, though it's rarely necessary. If you'd rather skip it, our optional seam sealing service handles it before we ship.
- Can I use the inner with other tarps? The Swiftline inner is unlikely to work well with other tarps, so we don't recommend it.
- Do your Bug Shelters or Bivys work with the rain fly? We do not recommend it. While you might be able to set them up in a pinch, they would be misshapen and difficult to use.
Specifications
Size Recommendations
Material Options
Packaged Weight
Reduce trail weight up to 48g (1.7 oz) by removing some non-essential items
Dimensions
Floor width: 76cm / 30"
Interior Ridge Height*: 109cm / 43"
Tub height*: 20cm / 8"
*Short inner is 1" lower in interior ridge height (42" vs. 43") and tub depth (7" vs. 8").
The dimensioned drawings below show the LONG inner. Subtract 6" in floor length for the Medium, and 12" for the Short. For the Short, also subtract 1" in height.
Click to enlargeRequired items (not included):
- Seam Sealer: Seal the fly's seams before your first trip. Use a sealer made for silicone-coated fabrics: we recommend Gear Aid Seam Grip +Sil. Or use our optional seam sealing service, and we'll handle it before shipping.
-
Trekking Poles: About 120cm (~47") for full height of the shelter.
Or use our optional tent poles. - Stakes: 6 (8 for better wind stability)
Pitching
How to pitch
- Prep: Set your poles to about 120 - 122 cm (47 - 48").
- Stake corners: Stake out the four main corners in a rectangle.
- Insert and stake poles: Pass poles under the fly, grab through the vent and nest the handle in the pole cup. Then stake out the apexes.
- Stake vestibule: Stake out the remaining two corners.
- Adjust: Adjust guylines and stakes to acheive a taut and balanced pitch.
- Attach inner: Clip the inner to the fly at the apexes and corners. Shorten connecting cords to tighten.
Tip: When breaking camp, leave the inner and outer connected so your shelter is ready for a quick, seamless setup next time.
How to pitch just the inner
When the weather is nice, you might want to pitch the inner without the rain fly. Here's how to do that.
- Prep: Unclip the rainfly's apex guylines (2) from the fly. You'll use these for the inner.
- Stake corners: At each corner of the tub, extend the shock cord to nearly its full length and clip it to the tie out at the bottom corner of the tub. Stake out all the corners, fairly tightly, in a rectangle.
- Install pole cups: Clip the guylines to the pole cups, then clip the inner's apex to the opposite side of the pole cup.
- Raise and stake apexes: Insert the pole handle into the pole cup to raise the apexes. Stake them out so the guyline runs roughly inline with the ridgeline.
Tip: If you're having issues with stability, it's likely due to either insufficient tension on the floor, or to the angle at which the guylines are running with respect to the inner.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 4
Better Lips, Better Fit, Less Nonsense
Color: Black, Size: 13-inch for New MacBook Air & Pro
I tested this sleeve with a 13.6” MacBook Air (M4), and the difference is immediately noticeable.
First thing: fit. This one actually holds the laptop in place. The padded “lips” in the corners create just enough resistance that you have to guide the MacBook in and out. It’s not a loose drop-in like other cases — it feels controlled. If I shake it, there’s barely any movement, which is exactly what I was looking for.
Second: build quality. The stitching is clean and consistent — almost surgical compared to the wrinkled mess I saw on another model. The outer fabric stays flat, no weird waves or cheap-looking folds. The interior lining is softer and thicker too, so it feels more protective without being bulky.
Third: structure. I even did a quick “real-world” test — stood it vertically on a mattress, zipper open, applied pressure from the top — and it held its shape. The other case I tried would have collapsed immediately. This one actually feels like it can handle normal use without transferring pressure straight into the laptop.
The external pocket is simple but practical. It fits the charger brick and cable without interfering with the main compartment, which keeps the laptop fit intact.
Only downside: I could do without the orange accents. A full black version would be perfect. But honestly, that’s cosmetic — functionally, this one does what it’s supposed to do.
At around this price point, this feels fair. Not luxury, not overhyped — just a well-executed, practical sleeve that gets the fundamentals right.
Bottom line: not perfect, but finally something that feels properly made and actually holds the laptop instead of just surrounding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
★★★★★ 5
Great Laptop Case !
Color: Black, Size: 13-inch for New MacBook Air & Pro
This case is reallllly nice and durable, the cushioned corners is what really makes this case special imo. The outer layer is a nice durable think fabric. It fits perfectly. The only downside is the zipper traction is not as smooth as I would like ,,, but I guess I can fix that with some oil/wd40. I would recommend this laptop case ! 👌🏽👌🏽👌🏽
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
★★★★★ 5
It’s perfect!
Color: Light Blue, Size: 15-inch for New MacBook Air, Color: Light Blue, Size: 15-inch for New MacBook Air
This case matches my MacBook Air perfectly! It’s definitely going to protect your laptop and it’s really well built and designed. So glad I went with this case than the other brands!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Reliable and Versatile Adapter for My MacBook Air
I have a 13-inch MacBook Air, M4, 2025, and I use it for everything: work, watching videos and series, and occasionally gaming. I also regularly attend court hearings and professional meetings through Zoom, Google Meet, and similar platforms, so I cannot afford connection issues.
This adapter, especially with its LAN port, has been very useful. It gives me more confidence when attending hearings online because I can rely on a stable wired connection. It also works well while connecting other devices, such as microphones or pen drives, which makes it very versatile.
The finish and materials feel solid and high-quality. I used to have a white plastic adapter from another brand, but it ended up changing color with use. This one stays cleaner, looks more professional, and is easier to keep in good condition.
It is easy to carry, practical, and very efficient.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 5
Good quality product
Good value for the price I paid. I have all the slots in use and it works fine. It really helps increase the reading and network speeds, if (like in my case) I have to use both ethernet and/or wifi antenna for my company laptop.
It is slim, sturdy, discreet and I like the main cable that connects to the PC is very flexible like a cord.
Very happy with it.
The only downside is that it gets very hot, I don't know why, but other than this, it really meets my expectations!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
recommand products
Faraday Tent – EMF Shielding & Privacy Protection – OffGrid
25.83
Coody 17.2 (Koala-7) Beige Inflatable Tent House for Camping (2-10 per – Live More Outside
22.98
KingCamp Quick-up Sun Shelter Canopy
21.37
6 Person Pop up Screen Tent
28.09
Tiny Cabin Style Camping Hot Tent With Two Poles Winter Camping Tent 0 – Dandelionshell
28.60