amp selector pedal Palmer P3EASY Almer T-Series Easy Amp Selector Pedal

amp selector pedal Palmer P3EASY Almer T-Series Easy Amp Selector PedalFeaturing the renowned quality of our T Series it switches the input signal (e. g. that of a guitar) between 3 outputs. For increased dynamic response and headroom the 3 EASY steps up the 9V power supply to approx. 30V. Switching is silent and instantaneous. This is achieved by processor controled long life microswitches while the actual footswitches serve as mechanical triggers only. Input and outputs are set to unity gain while output is lo Z to

Featuring the renowned quality of our T-Series it switches the input signal (e.g. that of a guitar) between 3 outputs. For increased dynamic response and headroom the 3-EASY steps up the 9V power supply to approx. 30V. Switching is silent and instantaneous. This is achieved by processor controled long-life microswitches while the actual footswitches serve as mechanical triggers only. Input and outputs are set to unity gain while output is lo-Z to prevent signal loss in FX chains and long cable runs. Outputs 1 + 2 are floating and electrically isolated by a high quality transformer to eliminate ground loops (most competitors sell this feature as an accessory only). Since guitars need to be grounded for proper shielding output 3 is not isolated. When using this to connect a battery powered tuner output 1 can be grounded via a sliding switch. The discrete Class A FET input amplifier is similar to the input stage of a hi-Z tube amplifier.Due to increased power consumption the 3-EASY is not battery operated, and it comes without a wall wart since most pedal boards feature a 9V power supply. Palmer power supplies are available as accessories ??" the single output PW9V, or the universal pedal board power unit PWT12 with 6 x 2 isolated outputs.

• Type: Amp switcher
• Inputs: 1
• Outputs: 3
• Input connectors: 6.3 mm Jack
• Transformer isolated outputs: Yes
• Controls: 3 x footswitch, ground lift